Preparation and application of novel polymer nanoparticles in the detection of copper ion and cysteineEI北大核心CSCD

A novel amphiphilic copolymer,dipropenoxystyrene anthracene and acrylic acid copolymer（BASA-AA） was designed and synthesized based on divinyl anthracene. The polymer self-assembled rapidly in water to create polymer nanoparticles（BASA-AA NPs）with a uniform size of 45 nm,no dye leakage,and great brightness（Φ= 36%）. Because of the enormous number of carboxyl groups on the surface of the particles,it can disperse extremely well in water,and can be used for the rapid detection of copper ion and cysteine（Cys）in pure water, with the limit of detection of 45 nmol/L. The fluorescent intensity of the nanoparticles will be greatly reduced after the introduction of copper ion,realizing the detection of copper ion with high selectivity and sensitivity. A composite probe made of BASA-AA NPs and copper ion can detect Cys in the range of 0.1-10 µμmol/L,with the detection limit of 84 nmol/L,due to the high binding capacity of the sulfhydryl group and copper ion. The method is simple and rapid in material synthesis and preparation,and shows high selectivity and sensitivity in pure water. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Investigating the Mechanism by Which Intragap States Tailor Light Emission: Case of Copper Deficient and Zn Doped Cu−In−Se Quantum Dots**

The large structural tolerance of I–III–VI group quantum dots (QDs) to off-stoichiometry allows their photoluminescence properties to be adjusted via doping, thereby enabling application in different fields. However, the photophysical processes underlying their photoluminescence mechanism remain significantly unknown. In particular, the transition channels of CuInSe₂ QDs, which are altered by intrinsic and extrinsic intragap states, remain poorly reported. Herein, we investigated the photophysical processes associated with intragap states via electrochemical and optical techniques by using copper deficient Cu−In−Se QDs as well as Zn doped Cu−In−Se QDs. When the Cu/In molar ratios of Cu−In−Se QDs increased from 0.3 : 1 to 0.9 : 1, the photoluminescence spectra displayed a red-shift from 700 nm to 1050 nm. Although there was a blue-shift after the introduction of Zn²⁺ dopants in Cu−In−Se QDs, a significant red-shift occurred (from 660 nm to 760 nm) when the Zn/Cu molar ratios decreased from 0.7 : 0.3 to 0.3 : 0.7. The Gaussian deconvolution results of the photoluminescence spectra and the band gap derived from absorption spectra by fitting supported the fact that the optical transition channels are dependent on the Cu/In and Zn/Cu molar ratios. After the introduction of the Zn²⁺ ions, the alloyed-resultant blue-shift of the emission spectra was observed, primarily due to the enlarged band gap; however, the radiative recombination of prominent intrinsic intragap states is still observed; and only a small proportion of the band-edge exciton undergoes recombination for the sample with low Zn content. Cyclic voltammetry measurements revealed well-defined extrinsic Zn_Cu intragap states (Zn substitution on Cu sites) and intrinsic Cu^x (x= 1+/2+) states in the band gap. The results presented here provide a better understanding of the varying effects of dopant on photoluminescence in terms of I–III–VI group QDs.     

How Doping Affects the Activity of the Aluminum Oxide Support

The performance of heteronuclear clusters [AlXO₃]⁺ (X=Al, AlO₄, AlMg₂O₂, AlZnO, AlAu₂, Mg, Y, VO, NbO, TaO) in activating methane has been explored by a combination of high–level quantum calculations with reported and supplementary gas-phase experiments. With different dopants in [AlXO₃]⁺, the mechanism, reactivity and selectivity towards methane activation varies accordingly. The classic HAT competes with PCET, depending on the composition of intramolecular interactions. Although the existence of terminal oxygen radical is beneficial for classic HAT, the Al_t−C interaction in the [AlXO₃]⁺ clusters as enhanced by the strongly electronegative doping groups (X=Al, AlZnO, Mg, Zn, VO, NbO, TaO) favors the PCET process, facilitating C−H bond breaking. In addition, with different dopants, the destiny of the split methyl group varies accordingly. While strong interaction between Al_t and CH₃ results in the formation of the Al_t−C bond, dopants with variable valance may promote the formation of deep-oxidation products like formaldehyde. It has been discussed in detail how to regulate the activity and selectivity of the active center of the catalyst via rational doping.     

High Valent Mercury Fluoride Ions

Mercury fluoride ions formed during the laser ablation of HgF_{2( s )} show the formation of six different cluster ion series viz., HgF_n^±, Hg_nF_n–2^±, Hg_nF_n–1^±, (HgF)_n^±, Hg_nF_n+1^±, and Hg_nF_n+2^±. Among the different ion series, the observation of high valent HgF_n^±_(n^±_{=3,4; n}⁻_=6–8) indicates the existence of corresponding molecules which signify the remarkable participation of 5d Hg electrons in the chemical bonding with F atoms and thus make Hg a truly transition metal. Further, molecular orbital calculations show a large HOMO-LUMO energy gap (≥3 eV) and high electron affinity (≥5 eV) that indicates highly stable HgF_n=3,4,6,8 with super halogen properties.     

Cu-Doped MoSi2N4 Monolayer as a Potential NH3 Sensor

Cu doped MoSi₂N₄ monolayer (Cu-MoSi₂N₄) was firstly proposed to analyze adsorption performances of common gas molecules including O₂, N₂, CO, NO, NO₂, CO₂, SO₂, H₂O, NH₃ and CH₄ via density functional theory (DFT) combining with non-equilibrium Green's function (NEGF). The electronic transport calculations indicate that Cu-MoSi₂N₄ monolayer has high sensitivity for CO, NO, NO₂ and NH₃ molecules. However, only NH₃ molecule adsorbs on the Cu-MoSi₂N₄ monolayer with moderate strength (−0.55 eV) and desorbs at room temperature (2.36×10⁻³ s). Thus, Cu-MoSi₂N₄ monolayer is demonstrated as a potential NH₃ sensor.     

Fe-Doped CoS2 Nanoarrays: Efficient Electrocatalytic Nitrate Reduction to Ammonia under Ambient Conditions

The electrocatalytic nitrate reduction reaction (NO₃⁻RR) enables the reduction of nitrate to ammonium ions under ambient conditions. It was considered as an alternative reaction for the production of ammonia (NH₃) in recent years. In this paper, we report that the Fe doping CoS₂ nanoarrays can effectively catalyze the formation of NH₃ from nitrate (NO₃⁻) under ambient conditions. This is mainly due to the increase of the NO₃⁻ reaction active site by Fe doping and the porous nanostructure of the catalyst, which greatly improves the catalytic activity. Specifically, at −0.9 V vs. RHE, the NH₃ yield rate (R_NH3) of Fe−CoS₂/CC is 17.8×10⁻² mmol h⁻¹ cm⁻² with Faraday Efficiency (FE) of 88.93 %. Besides, such catalyst shows good durability and catalytic stability, which provides the possibility for the future application of electrocatalytic NH₃ production.     

Calculation of Ionization,Excitation and Electron Capture Cross Sections for Be4++H(2s, 2p) Collisions

A computational study of Be⁴⁺+H(2s, 2p) collisions has been carried out employing the Classical Trajectory Monte Carlo (CTMC) method for the impact energy range from 20 keV/u to 1000 keV/u. The integral n partial cross sections for H(n) excitation and Be³⁺(n) electron capture and, the total ionization and electron capture cross sections are calculated and compared to recent semiclassical results. A general good agreement is observed for the n partial and total electron capture and ionization cross sections. The comparative study of the three inelastic processes show no significant differences between both excited targets.     

Surface modification of date palm activated carbonaceous materials for heavy metal removal and CO2 adsorption

In this study, high surface area activated carbon (AC) was prepared from a local palm tree (Phoenix Dactylifera) using a variety of metal carbonates activators and finally achieved an excellent S_BET of 2700 m²/g when Cs₂CO₃ was used as an activating agent at a temperature of 600 °C. Surface modification of AC was carried out using various nitrogen transporting agents, resulting in N-doped ACs with nitrogen content varying from 4.0 to 11.4 %, depending on the functionalizing agents and activators used. The bimodal (presence of micro- as well as meso-porosity) ACs with such excellent surface properties were studied for their CO₂ uptake capacity at two different temperatures (0 and 25 °C) by isotherms recorded at pressure 1 bar and showed a remarkable uptake ability of 3.52 mmol/g (at 25 °C) and 5.6 mmol/g (at 0 °C), respectively. Also, batch experiments with variable pH, contact time, adsorbate concentrations, adsorbent dose, and temperatures were evaluated to understand the mechanism of sorption phenomena of Cr(VI) and Pb(II) achieving > 99.9 % removal capacity by the prepared ACs. Depending on the heavy metal ions being investigated, it was revealed that the pH of the solution and the amount of adsorbent had a direct impact on the total adsorption ability. Nitrogen atoms doped into the carbon frameworks were found to enhance the adsorption in the case of Pb(II) while the removal of Cr(VI) appeared to be unaffected. Maximum adsorption for Cr(VI) was observed at pH 2 and was determined to follow Freundlich isotherm while that of Pb(II) was observed at pH 7 and follows Langmuir isotherm. Best adsorption was found at an adsorbate concentration of 10 ppm and an adsorbent dose of 10 g/L. Kinetic modeling parameters showed the applicability of pseudo-second-order model perfectly.     

Combined DFT and wave function theory approach to excited states of lanthanide luminescent materials: A case study of LaF3:Ce3+

Lanthanide luminescent materials play key roles in modern society, but their first-principles treatment remains a great challenge due to complex manifold of electronic excited states and the difficulty in performing excited state structural relaxations that is necessary to model luminescent properties. Herein, we propose a practical approach that combines embedded cluster model (ECM) based multi-configurational wave function theory (WFT) and occupancy constrained density-functional theory plus the Hubbard U correction (OC-DFT + U) to treat lanthanide doped luminescent materials, using LaF₃:Ce³⁺, a typical scintillator with low symmetry, as a case study. We show that the combined approach yields accurate absorption energies with an error on the order of 200 cm⁻¹, but the emission energies are significantly underestimated, the origin of which is further clarified by vibrationally resolved absorption and emission spectra calculation. This work demonstrates the possibility of combining ECM-based wave function theory and periodic DFT into a comprehensive computational scheme for lanthanide luminescent materials and highlights the limitations of the current implementation of OC-DFT + U for excited state structural optimization.     

Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone–releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-β-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.